Probelt WR100 Fall Arrester 6 m
- Product Code: 821006
- EAN: 6430039770737
Probelt WR100 Retractable Fall Arrester 6 m
The Probelt WR100 is a retractable webbing fall arrester designed for vertical fall protection. Its six-metre working length allows the user to move in relation to an anchorage point positioned above the work area. In the event of a fall, the mechanism locks the webbing while the internal braking and energy-dissipating mechanism controls the arrest.
Key features
- Automatically retracting 6 m textile webbing
- Fall-activated locking mechanism
- Internal braking and energy-dissipating mechanism
- Impact-resistant composite housing
- Swivelling anchorage handle
- Swivelling locking snap hook with fall indicator
- No separate energy absorber is required
Applications
The WR100 is suitable for vertical work on construction sites and during maintenance and installation tasks. The device is attached to an anchorage point above the user. The webbing connector attaches to an A-marked front or rear attachment point on an EN 361 compliant safety harness.
Safety and compliance
The retractable fall arrester complies with EN 360:2002 and carries the CE 0082 marking. It is intended for one user weighing no more than 120 kg and for vertical use only. The anchorage point must have a minimum static strength of 12 kN. The maximum permitted deviation from the vertical is 40 degrees. When installed directly above the user, the minimum required clearance is 2.6 m. The device is not intended for horizontal or edge use, and the webbing must be protected against sharp edges.
Technical specifications
- Brand and manufacturer: Probelt
- Model: WR100
- Product code: 821006
- Type: retractable webbing fall arrester
- Working length: 6 m
- Webbing width: 17 mm
- Webbing: polyester/aramid textile webbing
- Housing: black composite housing
- Maximum user weight: 120 kg
- Number of users: 1
- Working orientation: vertical
- Maximum deviation from vertical: 40°
- Minimum clearance for vertical use: 2.6 m
- Periodic inspection interval: 12 months
- Webbing unit replacement interval: 10 years from manufacture
- Standard: EN 360:2002
- CE marking: CE 0082
