Top Swede 2515 Craftsmen Trousers Hi-Vis Class 1

Top Swede 2515 RT Class 1 is a high-visibility work trouser for construction, concrete work and installation environments. It is designed for professional use where heavy cotton fabric, holster pockets and knee pad compatibility are required.

General information

Top Swede 2515 is a heavy cotton high-visibility craftsmen trouser for concrete workers, formwork carpenters, precast installers, bricklayers and similar site roles.

The main functional benefit is the robust fabric and pocket construction, which supports abrasive work conditions and tool-carrying tasks.

For procurement and HSE assessment, the key points are Class 1 compliance, loose fit sizing and the non-stretch cotton construction.

Technical specifications

• PRODUCT TYPE: High-visibility craftsmen trousers with holster pockets
• MAIN MATERIAL: 100% cotton, 375 g/m²
• CONTRAST MATERIAL: 70% polyester, 30% cotton, 300 g/m²
• CONSTRUCTION: Heavy cotton fabric, strong seam thread, pre-bent legs
• STRETCH: No stretch construction
• CERTIFICATIONS: EN ISO 20471 (High-visibility clothing), class 1; OEKO-TEX
• REFLECTIVE DETAILS: Reflective configuration according to Class 1 requirements
• POCKETS AND ATTACHMENTS: Holster pockets, front pockets, back pockets, thigh pockets, ruler pocket, knife holders, pen pocket, phone pocket, concealed ID-card pocket, D-ring, adjustable hammer loop
• KNEE PROTECTION: Knee pad pockets loaded externally from below
• FIT: Loose fit, large sizing
• SIZE RECOMMENDATION: Usually order 1 size smaller; trouser size C50 corresponds to wearer size C52
• SIZE RANGE: C44–C62, D92–D120, C146–C156
• CARE: Wash at 60 °C, do not bleach, tumble dry low, iron max 100 °C, do not dry clean

Benefits and differences compared to similar products

• The 100% cotton main fabric is suited to concrete-related work where cotton is often preferred over lighter synthetic blends.
• The 375 g/m² fabric weight positions the trouser as a heavy summer trouser with limited insulation against wind and cold.
• The loose fit provides movement allowance without relying on stretch panels.
• Externally loaded knee pad pockets allow knee protection to be inserted from below without opening the trouser from the inside.

Intended use

The trouser is suitable for construction and concrete-sector work where durable fabric, tool pockets and EN ISO 20471 Class 1 compliance are required.

Typical users include concrete workers, formwork workers, precast installers, bricklayers and installers needing a heavier work trouser for summer or transitional conditions.

It is not suitable for work requiring a higher high-visibility class, stretch-based mobility or a very lightweight hot-weather trouser.

For non-user stakeholders, the product should be evaluated against the site visibility requirement, knee protection policy and size table before ordering.

Q & A

Does the product have a warranty?

Warranty handling follows the manufacturer’s and seller’s terms. Product defect cases are assessed based on written information.

What is the availability?

Common sizes are available immediately in Kerava. Ordered sizes have an estimated delivery time of approximately 1 week.

Where can technical questions be addressed?

Additional technical questions, sizing checks and suitability assessments can be handled in writing based on the product data.

Delivery information

Common sizes are available from the Kerava store. Ordered sizes have an estimated delivery time of approximately 1 week.

The black-yellow colour has return rights.