Sievi AL Hit 9 XL+ S3 Winter Boot
- Product Code: 52085-373
- EAN: 6438157182517
- Product features: High-traction rubber outsole
- SEASON: WINTER
Sievi AL Hit 9 XL+ S3 HRO Winter Safety Footwear
S3 CI FO HRO SC SR | XL wide fit
Sievi AL Hit 9 XL+ S3 HRO is a warm, wide-fitting safety boot for demanding winter conditions. Its aluminium toe cap, steel penetration-resistant midsole and high-grip Sievi TractionPro® outsole provide protection for cold outdoor work and changing surfaces.
The warm lining and insole with an aluminium layer help retain heat inside the footwear. The double-density PU and rubber sole remains flexible and provides grip in freezing conditions. According to the manufacturer, the HRO-rated outsole withstands brief contact temperatures of up to 300 °C.
Key Features
- EN ISO 20345:2022 S3 CI FO HRO SC SR classification
- Lightweight aluminium toe cap
- Steel penetration-resistant midsole
- Warm winter lining
- Insole with a heat-reflecting aluminium layer
- High-grip Sievi TractionPro® outsole
- Double-density PU and rubber sole
- HRO heat-resistant outsole
- Abrasion-resistant scuff cap
- Reflective details for improved visibility
- Wide M-48 XL last
- EU sizes 39–48
Applications
This winter safety footwear is suitable for outdoor work, construction, maintenance, transport, logistics, industry and other cold workplaces where toe protection, penetration resistance and a high-grip outsole are required.
It can also be used in workplaces where the outsole may be briefly exposed to hot surfaces. The application must always match the workplace risk assessment and the footwear’s stated protective properties.
Who Is It For?
AL Hit 9 XL+ is designed for users who need winter safety footwear with a wider-than-standard fit. The XL last provides additional room for wide feet, thicker work socks and the toe space needed in cold conditions.
Standards Explained
- EN ISO 20345:2022: the standard specifying requirements for occupational safety footwear.
- S3: the footwear includes a safety toe cap, antistatic properties, heel energy absorption, a water-resistant upper, penetration resistance and a cleated outsole.
- CI: the sole construction provides cold insulation in accordance with the standard’s test requirements.
- FO: the outsole resists fuel oil in accordance with the standard.
- HRO: the outsole withstands contact heat of 300 °C for 60 seconds in the standard test.
- SC: the toe area includes an abrasion-resistant scuff cap.
- SR: the footwear has passed the standard’s additional slip-resistance test.
Protective Features
The aluminium toe cap protects the toes against falling objects and compression. According to the manufacturer, it meets the requirements for 200-joule impact resistance and compression resistance up to 15,000 newtons. The aluminium toe cap is lighter than a conventional steel toe cap.
The steel penetration-resistant midsole reduces the risk of sharp objects penetrating through the sole. The rubber tread of the Sievi TractionPro® outsole retains its flexibility and grip in freezing conditions, while the PU midsole provides shock absorption.
The warm lining, CI-rated sole construction and insole with an aluminium layer support use in cold conditions. Reflective details improve the wearer’s visibility in low-light environments.
Limitations
The S3 classification specifies a water-resistant upper, but no waterproof membrane or WR classification is stated for this product. It should therefore not be described as fully waterproof or recommended for continuous wet use without separate confirmation.
The HRO rating applies to brief contact between the outsole and a hot surface. It does not mean that the complete footwear protects against heat, molten metal or welding spatter. Suitability for welding, firefighting and other tasks requiring specialised heat protection must be verified separately.
The footwear is not metal-free or electrically insulating. Suitability for ESD areas, chemical handling and chainsaw work must be confirmed with the manufacturer before use.
Technical Summary
| Product type | Winter safety footwear |
|---|---|
| Safety classification | S3 CI FO HRO SC SR |
| Standard | EN ISO 20345:2022 |
| Toe cap | Aluminium |
| Penetration resistance | Steel midsole |
| Upper material | PU-coated leather |
| Sole material | Double-density PU and rubber |
| Outsole | Sievi TractionPro® |
| Lining | Warm winter lining |
| Insole | Insole with a heat-reflecting aluminium layer |
| Cold insulation | CI |
| Heat resistance | HRO, outsole 300 °C / 60 seconds |
| Slip resistance | SR |
| Scuff cap | SC |
| Antistatic properties | Yes, as required by the S3 classification |
| ESD | Information must be verified with the manufacturer |
| Last | M-48 XL, wide |
| Sizes | EU 39–48 |
| Product code | 48-52085-373-0PM |
| Manufacturer information | Sievi AL Hit 9 XL+ S3 HRO |
SEO Title
Sievi AL Hit 9 XL+ S3 HRO Winter Safety Boot
Meta Description
Wide-fitting Sievi AL Hit 9 XL+ winter safety footwear with an aluminium toe cap, steel penetration-resistant midsole and high-grip HRO outsole.
