Sievi AirGo 5 RollerH safety boot






- Product Code: 52539
- Product features:
- Product features:
- Product features: High-traction rubber outsole
Sievi AirGo 5 RollerH XL S1P - breathable safety ankle boots with BOA® fastening
Sievi AirGo 5 RollerH XL S1P is a breathable, roomy safety ankle boot intended for dry working environments. The patented SieviAir® sole system dissipates moisture through channels in the side of the sole, while the 3D-dry® lining transfers moisture away from the foot.
The XL last provides more room for the feet and toes than a standard last. The BOA® Fit System enables quick, precise adjustment and makes the footwear easy to put on and remove. The FlexEnergy® heel element and FlexStep® sole material cushion impacts during walking.
Key features
- Aluminium safety toecap protects against impacts of 200 joules and compression forces of 15,000 newtons.
- Steel penetration-resistant midsole helps prevent sharp objects from penetrating the sole.
- SieviAir® system dissipates moisture through ventilation channels in the sole.
- FlexEnergy® heel element absorbs impacts and returns more than 55% of the kinetic energy absorbed by the element.
- BOA® Fit System provides quick, precise and evenly distributed adjustment.
- XL last offers additional room for the feet and toes.
- 3D-dry® lining transfers moisture away from the foot.
- Sievi Dual Comfort insole includes PORON® shock-absorbing cushions under the heel and ball of the foot.
- Viscoelastic memory foam ankle protection adapts to the foot, supports the ankle and absorbs impacts.
- The original insoles can be replaced with certified orthopaedic insoles.
- Made in Finland.
Applications
These safety ankle boots are particularly suitable for dry indoor areas and other working environments requiring toe protection, penetration resistance, breathability and ESD properties. Potential applications include warehousing, logistics, installation, maintenance, manufacturing and electronics work, provided that the workplace risk assessment matches the protection offered by the footwear.
Who is this product suitable for?
AirGo 5 RollerH XL S1P is intended for users who need roomy safety footwear for extended periods of work. The XL last is particularly suitable for users requiring a wider fit and additional toe room. The ankle-height construction and adaptive ankle padding provide support around the ankle.
Standards explained
- EN ISO 20345:2022+A1:2024: European standard specifying requirements for safety footwear.
- S1P: the footwear has a safety toecap, closed heel area, antistatic properties, heel energy absorption and penetration resistance.
- SR: slip resistance has been tested on a ceramic tile surface with glycerol.
- SC: the toe area meets the additional requirement for scuff-cap abrasion resistance.
- FO: the outsole meets the standard requirement for resistance to fuel oil.
Protective properties
- Aluminium safety toecap.
- Steel penetration-resistant midsole with a penetration resistance of 1,100 N.
- Antistatic construction.
- ESD properties: resistance range stated by Sievi is 100 kO-35 MO in accordance with IEC 61340-5-1.
- SR-tested slip resistance.
- FO-rated, oil-resistant outsole.
- Heel energy absorption of at least 20 J.
Limitations of use
No WR or WPA marking is stated for this product. It should therefore not be described as waterproof or recommended for continuous use in wet conditions. Chemical resistance in accordance with EN 13832 has not been stated. Suitability for welding, forestry work, extremely hot conditions and other special hazards must be verified separately.
ESD footwear is not electrically insulating and does not protect the wearer against electric shock. Slip resistance always depends on the floor material, contaminants, condition of the footwear and actual working conditions.
Technical summary
| Product type | Safety ankle boot |
|---|---|
| Safety class | S1P SR SC FO |
| Standard | EN ISO 20345:2022+A1:2024 |
| Safety toecap | Aluminium |
| Penetration-resistant midsole | Steel |
| Upper material | Microfibre and textile |
| Lining | 3D-dry® |
| Sole material | Single-density FlexStep® polyurethane |
| Fastening | BOA® Fit System |
| BOA® lace length | 95 cm |
| Last | XL last |
| Insole | Sievi Dual Comfort |
| ESD | Yes, IEC 61340-5-1; 100 kO-35 MO |
| Antistatic | Yes |
| Slip resistance | SR |
| Oil-resistant outsole | Yes, FO |
| Sizes | 36-48 |
| Product code, sizes 36-38 | 48-52539-382-92M |
| Product code, sizes 39-48 | 48-52539-383-92M |
| Country of manufacture | Finland |
| Manufacturer information | Sievi AirGo 5 RollerH XL S1P - the product page also provides the EU Declaration of Conformity and user instructions. |
SEO title
Sievi AirGo 5 RollerH XL S1P safety ankle boots
Meta description
Breathable Sievi AirGo 5 RollerH XL S1P safety ankle boots with an XL last, BOA® fastening, aluminium toecap and steel penetration-resistant midsole.
