Semi-shank Safety Shoe CXS LAND TRAKON S3S

CXS LAND TRAKON S3S is a high-cut safety boot designed for light to medium-duty working environments. Its composite toe cap, textile Dyna-Flex puncture-resistant midsole and slip-resistant PU-rubber outsole provide protection on varied working surfaces. CI, HI and HRO properties support use on cold, warm and briefly heated surfaces.

Availability: made-to-order product. Orders are placed with the manufacturer in the Czech Republic on Thursdays. Products included in the weekly order are normally available for collection the following Monday, giving an estimated lead time of approximately 0.5 weeks. At other times, the estimated lead time is approximately 1.5 weeks.

S3S safety footwear for professional use

The boot complies with EN ISO 20345:2022 + A1:2024 and carries the marking S3S FO SR CI HI HRO. It features a composite toe cap and a flexible, textile Dyna-Flex puncture-resistant midsole.

Key features

• High-cut, lace-up safety boot.
• Composite toe cap.
• Textile Dyna-Flex puncture-resistant midsole.
• Upper made from 1.6–1.8 mm full-grain cow leather and hydrophobic Oxford fabric.
• Breathable mesh textile lining.
• Removable polyurethane foam insole.
• Slip-resistant and antistatic PU-rubber outsole.
• Outsole resistant to fuel oil in accordance with the FO classification.
• Cold insulation CI, heat insulation HI and heat-resistant HRO outsole.
• Reflective detail for improved visibility.

Upper, lining and insole

The upper combines 1.6–1.8 mm full-grain cow leather with hydrophobic Oxford fabric. The hydrophobic fabric repels water, but the boot is not specified as having a waterproof membrane. A breathable mesh lining and removable polyurethane foam insole support comfort during the working day.

Slip-resistant PU-rubber outsole for varied surfaces

The PU-rubber outsole combines polyurethane cushioning with the properties of a rubber contact layer. The SR classification confirms that the boot has passed the standard supplementary slip-resistance test on a ceramic surface. Actual grip still depends on the condition of the surface, contamination and working conditions.

Outsole properties

• SR: slip resistance tested in accordance with the applicable supplementary test.
• FO: outsole resistance to fuel oil.
• CI: cold insulation of the sole complex.
• HI: heat insulation of the sole complex.
• HRO: outsole tested for contact heat resistance at 300 °C.
• Antistatic construction helps reduce the accumulation of electrostatic charge during normal use.

Applications

According to the manufacturer, CXS LAND TRAKON S3S is suitable for light to medium-duty environments where toe protection, puncture resistance and a slip-resistant outsole are required.

Suitable applications

• Construction and renovation work.
• Logistics, warehouses and terminals.
• Installation, servicing and maintenance work.
• Craft and service-sector tasks.
• Light to medium-duty outdoor work.

Who is this product suitable for?

The boot is suitable for users who require high-cut safety footwear with ankle support for varied working surfaces. The composite toe cap and textile midsole reduce the amount of metal in the protective components, but the manufacturer does not state that the complete boot is entirely metal-free.

Standards explained

• EN ISO 20345:2022 + A1:2024: the safety footwear standard covering requirements including the impact and compression resistance of the toe cap.
• S3S: closed heel area, antistatic properties, heel energy absorption, restricted water penetration and absorption of the upper, cleated outsole and a PS-level non-metallic puncture-resistant insert.
• FO: outsole resistance to fuel oil.
• SR: supplementary slip-resistance test on a ceramic surface with glycerol.
• CI: cold insulation of the sole complex.
• HI: heat insulation of the sole complex.
• HRO: outsole contact heat resistance tested at 300 °C.

Protective features

• Composite toe cap protects against impacts and compression in accordance with EN ISO 20345.
• Dyna-Flex textile midsole provides PS-level resistance against penetration by sharp objects.
• SR-tested outsole provides verified slip-resistance performance under the specified test conditions.
• FO-rated outsole resists fuel oil.
• CI and HI markings indicate cold and heat insulation of the sole complex.
• HRO outsole withstands the standard contact heat test at 300 °C.

Limitations of use

• The boot is not specified as waterproof and no waterproof membrane is stated. Suitability for continuous wet use must be assessed separately.
• CI refers to cold insulation of the sole complex, not to an insulated winter lining. The product should not be described as a fully insulated winter safety boot without separate lining information.
• HRO does not indicate protection against molten metal, flames or continuous high heat. Suitability for welding and extreme heat must be verified separately.
• FO is not a general chemical-resistance classification. Chemical protection has not been confirmed by EN 13832 certification or a manufacturer chemical-resistance chart.
• No EN ISO 17249 certification is stated, so the boot must not be recommended for chainsaw work.
• Antistatic footwear does not replace electrically insulating footwear or ESD footwear where specific electrical protection is required.
• Approved additional traction devices may be required on extremely slippery ice.

Sizes, colour and weight

• Sizes: 39–48.
• Colour: black-grey.
• Approximate weight of one boot in size 43: 817 g.
• Sales unit: 1 pair.
• Carton quantity: 10 pairs.

Approximate insole lengths

• Size 39: 25.5 cm.
• Size 40: 26.2 cm.
• Size 41: 26.9 cm.
• Size 42: 27.6 cm.
• Size 43: 28.2 cm.
• Size 44: 28.9 cm.
• Size 45: 29.6 cm.
• Size 46: 30.2 cm.
• Size 47: 30.9 cm.
• Size 48: 31.6 cm.

Finished product dimensions may vary by approximately 0.5–1 cm depending on the model, cut and manufacturing process.

Frequently asked questions

Is CXS LAND TRAKON waterproof?

The product is not specified as fully waterproof. The S3S classification and hydrophobic Oxford fabric restrict water absorption and penetration, but no waterproof membrane is stated.

Is the boot suitable for winter use?

The CI marking indicates cold insulation of the sole complex, but the product information does not mention an insulated lining. Suitability for freezing conditions must be assessed according to the temperature, duration of work, surface and the level of thermal insulation required by the user.

Is the boot completely metal-free?

The toe cap is composite and the puncture-resistant midsole is textile. However, the manufacturer does not state that the entire boot is completely metal-free, so compatibility with metal-detector environments must be verified before use.

Can the insole be replaced?

The standard insole is removable. The suitability of any replacement insole must be verified because changing the insole may affect fit, protective performance and certification compliance.

Manufacturer information and documents

Product information, user instructions, the EU Declaration of Conformity and the technical product sheet can be checked on the official CXS LAND TRAKON S3S product page.