Safetop Twin-Leg Lanyard 1,78 m




- Product Code: 80228
- Available in stock 55 pcsThe product will be sent in 1-3 days
- Check store availability here
- Delivery costs starting from 10,04 €Pick up from the store0,00 €
Safetop 80228 Twin-Leg Elastic Lanyard 1.78 m – Energy Absorber
Safetop 80228 is a twin-leg elastic safety lanyard with an integrated energy absorber for fall protection. The Y-shaped design features two large 56 mm scaffold hooks and one steel screw-lock carabiner for connection to a safety harness.
The maximum overall length when fully stretched is 1.78 m, measured from the outer end of the screw-lock carabiner to the outer end of a scaffold hook. This measurement has also been physically verified by Protecton. The elastic construction shortens the lanyard when not under tension, helping reduce excess hanging webbing during work.
Key Features
- Twin-leg Y-shaped safety lanyard with two attachment legs
- Maximum fully stretched length: 1.78 m, including all connectors
- Relaxed length: approximately 1.37 m
- Elastic polyester webbing reduces excess hanging material
- Integrated energy absorber for fall protection
- Two large steel scaffold hooks with 56 mm gate openings
- One steel screw-lock carabiner for harness connection
- 40 mm wide elastic polyester webbing
- 34 mm wide energy absorber webbing
- Category III personal protective equipment
- Standards: EN 354, EN 355 and EN 362
Elastic Twin-Leg Design
The twin-leg construction allows the user to transfer between suitable anchorage points while maintaining continuous attachment when the transfer is performed correctly.
The elastic webbing helps keep the lanyard compact and reduces loose material around the user. This makes the lanyard practical for scaffolding, steel structures and industrial maintenance work.
Integrated Energy Absorber
The energy absorber is manufactured from 34 mm wide polyester webbing and protected by a polyethylene cover.
- Energy absorber dimensions: 230 × 34 × 32 mm
- Maximum energy absorber extension: 1.75 m
- Declared static strength: 15 kN
Safety information: During a fall, the energy absorber deploys and increases the overall length of the fall protection system. The required fall clearance must be calculated before use according to the manufacturer's instructions and the working conditions. The 1.78 m lanyard length alone does not represent the required fall clearance.
Hooks and Connectors
- 2 × Safetop 80113J steel scaffold hooks
- Scaffold hook gate opening: 56 mm
- Scaffold hook strength: 25 kN
- Scaffold hook standard: EN 362 Type A
- 1 × Safetop 80112J steel screw-lock carabiner
- Carabiner gate opening: 19 mm
- Carabiner strength: 25 kN
- Carabiner standard: EN 362 Type B
Recommended Applications
- Scaffolding and construction work
- Steel structure installation
- Ladder work, subject to a suitable risk assessment
- Industrial installation and maintenance
- Work at height using a compatible fall protection system
Technical Specifications
- Manufacturer: Safetop
- Product reference: 80228
- Product type: twin-leg elastic energy-absorbing lanyard
- Maximum overall stretched length: 1.78 m, including connectors
- Relaxed length: approximately 1.37 m
- Webbing material: polyester
- Elastic webbing width: 40 mm
- Energy absorber webbing width: 34 mm
- Energy absorber dimensions: 230 × 34 × 32 mm
- Maximum energy absorber extension: 1.75 m
- Connector material: steel
- Scaffold hooks: 2 × 56 mm gate opening
- Harness connector: 1 × 19 mm screw-lock carabiner
- Declared static strength: 15 kN
- Total weight: approximately 1,550 g including connectors
- Standards: EN 354:2010, EN 355:2002, EN 362:2004
- PPE category: III
Annual Inspection and Service Life
The equipment must be inspected at least every 12 months by a competent person in accordance with the manufacturer's instructions. Inspection records must be maintained.
The manufacturer specifies a maximum service life of up to 10 years from the date of manufacture for textile components. Actual service life depends on condition, use and inspection results.
Care and Maintenance
Clean with water and soap at temperatures not exceeding 30 °C. Do not use heat for drying. Inspect the webbing, stitching, energy absorber and connector locking mechanisms before use.
