Safetop Tibet Basic safety harness

Safetop Tibet Basic safety harness with manual pass-through buckles

Safetop Tibet Basic 80071 is a straightforward full-body harness for professional fall protection. It is designed for users who require an EN 361 compliant basic harness with front and rear fall-arrest attachment points and without additional padding or tool loops.

Manual pass-through buckles provide a simple and durable adjustment system. The 45 mm polyester webbing can be adjusted at the shoulders, chest and thighs to fit the user correctly.

Key features

• EN 361 full-body harness for professional fall protection
• Manual pass-through connecting and adjustment buckles
• Dorsal A-marked D-ring for fall arrest
• 40 cm dorsal extension strap for easier connection
• Frontal attachment loops for fall arrest
• The two frontal loops must always be used together
• Adjustable shoulder, chest and leg straps
• 45 mm polyester webbing
• Galvanised steel components
• No padding
• No tool loops
• Sizes S, M-XL and XXL

Simple construction for everyday use

Tibet Basic is designed as a basic professional harness for applications where straightforward construction, easy adjustment and EN 361 fall protection are the priorities. The harness does not include additional padding or tool loops, keeping the design simple and practical.

Attachment points

The dorsal D-ring is used to connect a fall-arrest system. The harness also includes a 40 cm dorsal extension strap to make connection easier.

The frontal fall-arrest attachment consists of two loops that must always be connected together. A fall-arrest system must not be attached to only one frontal loop.

Applications

Safetop Tibet Basic is suitable for construction, industrial maintenance, installation work, attachment to horizontal and vertical lifelines, securing at height and work on inclined surfaces.

Technical specifications

• Product: Safetop Tibet Basic
• Product code: 80071
• Type: full-body fall-arrest harness
• PPE category: III
• Webbing: polyester
• Webbing width: 45 mm
• Metal components: galvanised steel
• Dorsal attachment: D-ring
• Dorsal extension strap: 40 cm
• Frontal attachment: two loops used together
• Buckles: manual pass-through adjustment buckles
• Padding: no
• Tool loops: no
• Weight: approximately 1000 g
• Maximum user weight: 100 kg
• Sizes: S, M-XL and XXL

Sizes

• S: user height 155-170 cm, chest 70-90 cm, waist 75-110 cm, thigh 40-60 cm
• M-XL: user height 164-180 cm, chest 85-100 cm, waist 85-120 cm, thigh 50-75 cm
• XXL: user height 180-195 cm, chest 100-130 cm, waist 90-140 cm, thigh 60-85 cm

Standard

• EN 361:2002 - Personal protective equipment against falls from a height: full-body harnesses

Inspection and service life

The harness must be inspected before every use. Particular attention must be paid to the webbing, stitching, buckles, attachment points and adjustment components.

A periodic inspection must be carried out at least once every 12 months by an authorised or competent person. The inspection results must be recorded in the equipment inspection record.

If the harness has arrested a fall, is damaged or there is any doubt about its safety, it must be withdrawn from service immediately.