Safetop MAXIROLL 6 m Retractable Cable Fall Arrester

Safetop MAXIROLL 6 m is a retractable steel cable fall arrester (PPE) designed for fall protection systems. The device is tested for both horizontal and vertical use and is suitable for construction sites, industrial maintenance, steel structures, telecommunications work, and scaffolding, where the user moves between working positions and requires continuous fall protection.

Safetop MAXIROLL retractable cable fall arrester 6 m – horizontal and vertical use.

General information

The purpose of the retractable fall arrester is to stop a fall and allow controlled movement within a working range of up to 6 meters. The cable automatically retracts into the housing and remains under light tension as the user moves. In the event of a fall, the internal locking and braking mechanism engages immediately to stop the descent.

The device is structurally designed to withstand the additional stresses associated with horizontal use. Typically, retractable devices intended for vertical use are equipped with approximately 4.0 mm cable, whereas models suitable for horizontal use utilize a stronger ~4.8 mm steel cable for improved resistance to mechanical stress and wear.

When planning a fall protection system, sufficient clearance distance and adequate anchor point strength must always be ensured.

Technical specifications

• Product type: retractable cable fall arrester
• Length: 6 m
• Cable: galvanized steel
• Cable diameter: 4.8 mm braided steel cable
• Construction: retractable braking mechanism with end connector
• Use: tested for horizontal and vertical use
• Maximum user weight: 120 kg
• Connectors: EN 362 carabiner; lower connector with swivel
• Anchorage: oval steel connector; opening 30 mm × 18 mm
• Housing: high-strength nylon / thermoplastic casing
• Energy absorber: integrated polyester energy absorber
• Standards: EN 360:2002

Key benefits

• 6 m working length suitable for low to medium-height applications.
• 4.8 mm galvanized steel cable offers higher durability compared to thinner cables used in vertical-only devices.
• Suitable for both vertical and horizontal applications without needing separate equipment.
• Swivel connector reduces cable twisting during movement.

Intended use

Suitable for construction, industrial maintenance, roofing, telecommunications, and steel structure work where the user moves between positions. The device is used as part of a PPE fall protection system together with EN 361 full body harnesses and EN 362 connectors.

The device is not approved for sharp edge use (sharp edge rated). It must not be used in situations where the cable may be loaded over sharp edges without additional edge protection or other approved solutions.

Inspection and service life

The service life of the Safetop Maxiroll retractable fall arrester is not fixed to a specific number of years. It depends on usage conditions, load, storage, and inspections.

Service life

• No predefined maximum service life.
• Depends on usage conditions, storage, and inspection results.
• The device must be removed from service if wear, corrosion, or malfunction is detected.
• If the device arrests a fall, it must be withdrawn from use and inspected.

Inspections

• A visual inspection must be carried out before each use.
• Check markings, housing, connectors, and fasteners.
• Inspect the entire cable length for wear, broken strands, or corrosion.
• Test the braking mechanism by pulling the cable sharply.

Annual inspection

• The device should be inspected at least once per year.
• Inspection should be carried out by a competent PPE inspector.
• The inspection includes evaluation of the cable, housing, connectors, markings, and locking/retraction mechanism.
• Inspection results should be recorded in the equipment log or inspection record.

Q & A

• Warranty: according to manufacturer’s terms.
• Availability: confirmed at the time of order.
• Technical inquiries: provide application details, anchor point, and user load for PPE compatibility assessment.