PROTEKT DL012 steel rope ladder with aluminium rungs
The PROTEKT DL012 is a steel wire rope ladder for vertical access in industrial maintenance, construction sites and technical service areas. It is used for tanks, walls, platforms and similar work locations where ladder length must be selected according to the access height.
- Available in several lengths from a 1 m extension section up to 30 m.
- Aluminium rungs and galvanised steel wire rope provide clear technical material data.
- 310 mm rung width and 310 mm rung spacing support product comparison.
- Suitable for explosion-hazard zones according to the manufacturer’s product data.
- Available immediately from the Turku store; longer variants are factory-order items.
General information
The PROTEKT DL012 is a wide steel rope ladder used as an auxiliary access device for work at height and vertical movement. Its main functional benefit is the ability to select the ladder length according to the work location.
Before selecting the product, the buyer should confirm the anchorage arrangement, required length and the separate fall arrest system needed for the task.
Technical specifications
- Product type: rope ladder
- Model: DL012
- Manufacturer: PROTEKT
- Construction: wide rope ladder, steel wire rope structure
- Rungs: aluminium
- Rope: galvanised steel
- Mounting components: galvanised steel
- Rope diameter: 4 mm
- Rung width: 310 mm
- Rung spacing: 310 mm
- Weight: 0.58 kg / m
- Lengths: 1 m extendable section, 3 m, 5 m, 8 m, 10 m, 12 m, 15 m, 25 m, 30 m
- Certificates: PN-83/W-52501 clause 8 (rope ladder compliance), Certificate No. Z/02/013/17
- Special feature: suitable for explosion-hazard zones according to the manufacturer
- Maximum admissible load: 140 kg
- Use: one person at a time
Benefits and differences compared to similar products
- The DL012 has a metal wire rope structure, which separates it from textile rope ladders in construction and typical use.
- The wide range of lengths supports project-specific selection for tanks, walls, platforms and maintenance points.
- Aluminium rungs and galvanised steel wire rope provide relevant technical data for HSE, site management and purchasing.
- The manufacturer specifies suitability for explosion-hazard zones, which is relevant in selected industrial environments.
Intended use
The product is intended for professional use in industry, maintenance, construction and site access tasks requiring vertical movement. Typical applications include tanks, platforms, wall structures and industrial service work.
The ladder is not intended for uses outside the manufacturer’s stated purpose. Users must be trained, and fall protection must be arranged separately with an EN 363 (Personal fall protection systems) compliant system.
Q & A
Does the product have a certificate?
Yes. According to the manufacturer’s product data, the ladder complies with PN-83/W-52501 clause 8 and has Certificate No. Z/02/013/17.
What is the maximum load?
The manufacturer’s instruction manual states a maximum admissible workload of 140 kg.
Can more than one person use the ladder at the same time?
No. The instruction manual states that the ladder may be used by only one person at a time.
Is the product suitable for explosion-hazard zones?
Yes. The manufacturer’s product data marks the ladder as suitable for explosion-hazard zones.
Where can I ask technical or delivery-related questions?
For length selection, delivery time and suitability for the intended application, contact Protecton. Delivery time enquiries: Riku, +358 44 231 1731.
Delivery information
Availability: immediately from the Turku store. Longer and less common lengths are factory-order items with an estimated delivery time of approximately 4–7 weeks. The exact delivery time should be confirmed with Protecton before ordering.
