Probelt V37 Pro Padded Safety Harness M-XL

ProBelt V37 Pro Padded Safety Harness

The ProBelt V37 Pro Padded is a cushioned full-body harness compliant with EN 361:2002 for repeated work-at-height use. Padded shoulder straps and removable leg pads improve wearing comfort, while automatic chest and leg buckles make the harness quicker to put on. Fall arrest attachment points are provided at the front and rear.

Key features

• Padded shoulder straps
• Removable leg strap pads with press-stud fastening
• Automatic quick-release buckles on the chest and leg straps
• Steel dorsal fall arrest D-ring
• Two textile front attachment loops used together
• Dorsal attachment extension strap
• Fall indicator supports inspection of the harness condition
• Tool loops for hand tools weighing up to 2 kg
• Identity card stored in a hook-and-loop pocket on the back

Applications

The V37 Pro Padded is suitable for construction, installation work, industrial maintenance and other work-at-height applications involving repeated harness use. Its padded construction supports comfort during longer work periods, while the front and rear attachment points allow connection to different compatible fall arrest systems.

Safety and compliance

The ProBelt V37 Pro Padded is a CE-marked full-body harness compliant with EN 361:2002 and the EU Personal Protective Equipment Regulation 2016/425. A fall arrest system may only be connected to attachment points marked with a capital letter A.

When using the front attachment, both textile A/2 loops must be joined to the same connector. A fall arrest system must not be connected to only one front loop. The dorsal extension strap must be included when calculating the required fall clearance and must not be used over a sharp edge.

The 140 kg maximum rated load includes the user, tools and other equipment. The tool loops are intended for hand tools weighing up to 2 kg and are not fall arrest attachment points.

Sizes and measurements

Technical specifications

• Product number: 810026
• Brand: ProBelt
• Model: V37 Pro Padded
• Product type: padded full-body safety harness
• Dorsal attachment: steel D-ring
• Front attachment: two textile loops used together
• Buckles: automatic quick-release chest and leg buckles
• Shoulder straps: padded
• Leg strap pads: removable
• Tool loops: ABS plastic
• Maximum tool loop load: 2 kg
• Fall indicator: yes
• Maximum rated load: 140 kg, including the user and equipment
• Sizes: S, M–XL, XXL and 3XL
• Standard: EN 361:2002
• CE marking: CE 0082
• Maximum lifespan: 10 years from the date of manufacture
• Periodic inspection: at least every 12 months from the date of first use

Inspection and service life

The webbing, padding, stitching, buckles, attachment points, tool loops and fall indicator must be checked before every use. The harness must not be used if the fall indicator is damaged. A competent person must perform a periodic inspection at least every 12 months and record it on the product identity card. The harness must be withdrawn from use immediately if it has arrested a fall, fails an inspection or there is any doubt about its reliability. Its maximum lifespan is 10 years from the date of manufacture, although usage intensity and environmental conditions may shorten it.