Probelt V35C Basic Safety Harness

ProBelt V35C Basic Safety Harness

The ProBelt V35C Basic is an EN 361:2002 full-body safety harness with quick-release buckles for routine work at height. Made from non-elastic polyester webbing, this straightforward harness features clearly identified attachment points and automatic chest and leg buckles. The maximum combined weight of the user, tools and equipment is 140 kg under the conditions specified in the user manual.

Key features

• Non-elastic polyester webbing
• Automatic quick-release buckles on the chest and leg straps
• Steel dorsal fall arrest D-ring
• Two textile front attachment loops used together
• 40 cm dorsal extension strap
• Adjustable shoulder, chest and leg straps
• Product identity label positioned on the back
• Available in sizes S, M–XL and XXL

Applications

The V35C Basic is suitable for construction, installation work, industrial maintenance and other work-at-height applications requiring a straightforward full-body harness that can be put on quickly. It is intended for use as part of a compatible fall arrest system.

Safety and compliance

The ProBelt V35C Basic is a CE-marked full-body harness compliant with EN 361:2002 and the EU Personal Protective Equipment Regulation 2016/425. A fall arrest system may only be connected to attachment points marked with a capital letter A.

When using the front attachment, both textile loops must be joined to the same connector. A fall arrest system must not be connected to only one front loop. The 40 cm dorsal extension strap must be included when calculating the required fall clearance and must not be used over a sharp edge.

The 140 kg maximum rated load includes the user, tools and equipment. This load is permitted only when the harness is used with an energy absorber suitable for a 140 kg maximum load, as specified in the user manual.

Sizes and measurements

Technical specifications

• Product number: 810012
• Brand: ProBelt
• Model: V35C Basic
• Product type: full-body safety harness
• Maximum rated load: 140 kg, including the user and equipment
• Weight: 1,180 g
• Webbing material: non-elastic polyester
• Buckle material: steel
• Dorsal D-ring material: steel
• Front attachment: two textile loops used together
• Dorsal extension strap: 40 cm
• Sizes: S, M–XL and XXL
• Standard: EN 361:2002
• CE marking: CE 0082
• Maximum lifespan: 10 years from the date of manufacture
• Periodic inspection: at least every 12 months from the date of first use

Inspection and service life

The webbing, stitching, buckles, adjustment components and attachment points must be checked before every use. A competent person must complete a periodic inspection at least every 12 months and record it on the product identity card. The harness must be withdrawn from use immediately if it has arrested a fall, fails an inspection or there is any doubt about its condition. Its maximum lifespan is 10 years from the date of manufacture, although usage intensity and environmental conditions may shorten it.