Probelt CR300 Fall Arrester 28 m Retractable

Probelt CR300 Retractable Fall Arrester 28 m

The Probelt CR300 is a 28-metre retractable wire rope fall arrester designed for vertical fall protection. Its long, automatically retracting steel wire rope provides an extended working range in relation to an anchorage point positioned above the user. The device incorporates a fall-activated braking mechanism and energy absorption.

Key features

• 28 m galvanised steel wire rope
• Automatically retracting mechanism with fall-activated locking
• Internal energy absorber housed in the plastic casing
• External textile energy absorber
• AZ002ASI connector with a swivel and fall indicator
• Black plastic housing
• No separate energy absorber is required

Applications

The CR300 is suitable for vertical work on tall structures and in maintenance and installation applications requiring an extended working range. The device is anchored above the user, while the wire rope connector attaches to an A-marked front or rear attachment point on an EN 361 compliant safety harness.

Safety and compliance

The retractable fall arrester complies with EN 360:2023 and carries a CE marking. It is intended for one user weighing between 50 and 140 kg. The anchorage point must have a minimum static strength of 12 kN, and the maximum permitted wire rope deviation from the vertical is 40 degrees. When installed directly above the user, the minimum required clearance is 1.80 m. The device must not be used with the wire rope loaded over an edge or on sloping surfaces.

Technical specifications

• Brand and manufacturer: Probelt
• Model: CR300
• Type: retractable wire rope fall arrester
• Wire rope length: 28 m
• Wire rope material: galvanised steel
• Wire rope diameter: 4 mm
• Housing material: plastic
• Housing colour: black
• Weight: 11.25 kg
• Connector: AZ002ASI
• Permitted user weight: 50-140 kg
• Number of users: 1
• Working orientation: vertical
• Maximum deviation from vertical: 40°
• Minimum clearance for vertical use: 1.80 m
• Periodic inspection: at least every 12 months
• Wire rope and textile energy absorber replacement interval: 10 years from manufacture
• Standard: EN 360:2023