Kratos SPEED'AIR 4 Safety Harness

Rotating work-positioning belt and padded comfort for work at height

Kratos Safety SPEED’AIR 4 FA 10 207 is a professional full-body harness combining front and rear fall-arrest attachment points with a rotating work-positioning belt. Padded leg and waist sections, elastic shoulder straps and four automatic quick-release buckles make the harness easier to fit, adjust and wear during demanding work at height.

Key features

• Rear fall-arrest attachment with a dorsal D-ring and integrated extension strap
• Front attachment formed by two textile loops marked 2 × A/2 and used together
• Two lateral D-rings for work positioning
• 180° rotating work-positioning belt supports freedom of movement
• Four automatic quick-release buckles for efficient fitting and removal
• Adjustable shoulder, leg, chest and waist straps
• Elastic shoulder straps adapt to the user’s movements
• Padded leg loops and waist belt improve wearing comfort
• Two lanyard parking points for temporarily storing connector hooks
• Maximum user weight of 140 kg when used with a compatible fall-protection system

Applications

The harness is intended for professional tasks requiring both fall arrest and work positioning. Typical applications include installation, maintenance and construction work at height, as well as industrial maintenance operations.

Work positioning and attachment points

The dorsal D-ring and the two chest loops marked A/2 are the attachment points for a fall-arrest system. Both chest loops must always be used together. The lateral D-rings on the waist belt are intended for work positioning or restraint and must not be used for fall arrest.

The two lanyard parking points provide temporary storage for connector hooks when they are not in use. They are not fall-arrest attachment points and must not be used as such.

Technical specifications

• Product type: full-body harness with rotating work-positioning belt
• Product range: SPEED’AIR 4
• Attachment points: dorsal D-ring, sternal textile loops and lateral work-positioning D-rings
• Closure: four automatic quick-release buckles
• Adjustment buckles: 2
• Webbing material: polyester
• Lanyard parking points: 2
• Maximum user weight: 140 kg
• Weight, FA 10 207 00: 2.57 kg
• Weight, FA 10 207 01: 2.60 kg
• Weight, FA 10 207 02: 2.64 kg
• PPE category: Category III
• Standard: EN 361:2002 – Personal protective equipment against falls from a height, full-body harnesses; applies to the front and rear fall-arrest attachment points
• Standard: EN 358:2018 – Personal protective equipment for work positioning and prevention of falls from a height, belts and lanyards for work positioning or restraint; applies to the work-positioning belt and its lateral D-rings

Sizes and product references

• FA 10 207 00: S–M, weight 2.57 kg
• FA 10 207 01: M–L, weight 2.60 kg
• FA 10 207 02: L–XXL, weight 2.64 kg

Safety and compatibility

The 140 kg maximum rated load requires a fall-arrest and energy-absorbing system compatible with the total load. The harness, lanyards, connectors and anchorage solution must be selected as a compatible system based on the instructions for use and the workplace risk assessment.

Inspect the harness and verify that its markings remain legible before every use. Always follow the instructions supplied with the product. Further product information is available in the manufacturer’s product catalogue.