
KALYPSO 20 m retractable fall arrester with rescue winch RST



- Product Code: FA2040120S
- Order only product. The product will be ordered separately from the supplier.Delivery time approx. 3-15 business days
- Stores out of stock
- Delivery costs starting from 10,04 €Pick up from the store0,00 €
Kratos Safety KALYPSO 20 m retractable fall arrester with rescue winch
The Kratos Safety KALYPSO FA 20 401 20S is a single-user retractable fall arrester combining fall arrest protection with an integrated rescue winch. Its automatically retracting 20 m stainless steel wire rope follows the user's movement, while the internal braking mechanism limits the fall arrest force to below 6 kN. The winch enables controlled lifting or lowering of a person during rescue operations.
Key features
- 20 m stainless steel wire rope
- Integrated rescue and recovery winch
- Internal braking mechanism limits arrest force to below 6 kN
- Two 360° swivels help prevent the wire rope from twisting
- Stainless steel attachment connector with fall indicator
- High-impact polyamide housing with carrying handle
- Approved for a user weighing up to 140 kg in vertical use
- ATEX Zone 1 classification
Applications
The KALYPSO is intended for fall arrest and rescue systems requiring vertical movement and an emergency evacuation capability. Typical applications include tanks, manholes, shafts and other confined work areas when the device is installed on a compatible tripod or another anchorage arrangement approved by the manufacturer.
Rescue function
The integrated winch is intended solely for rescuing or evacuating people. It must not be used for lifting materials or securing loads. A person can be raised using the winch, while the permitted lowering distance is limited to 2 m. Rescue descents over a greater distance require a descender conforming to EN 341.
Safety and compliance
This CE-marked product is Category III personal protective equipment and complies with PPE Regulation (EU) 2016/425. The fall arrester conforms to EN 360:2023, while the rescue winch conforms to EN 1496:2017 Class B. Its ATEX marking is II 2 G Ex h IIC T6 Gb, with compliance to EN ISO 80079-36:2016 and EN ISO 80079-37:2016.
The device is intended for one user at a time. It is not approved for work near sharp edges or for use at fall factor 2. Use requires a compatible EN 361 fall arrest harness and an anchorage point with a minimum breaking strength of 12 kN, in accordance with the manufacturer's instructions.
Technical specifications
- Manufacturer: Kratos Safety
- Model: KALYPSO
- Product reference: FA 20 401 20S
- Product type: retractable fall arrester with integrated rescue winch
- Number of users: 1
- Maximum user weight: 140 kg
- Wire rope length: 20 m
- Wire rope diameter: 4.5 mm
- Wire rope material: stainless steel
- Housing material: polyamide 6 reinforced with 30% glass fibre
- Minimum breaking strength: greater than 12 kN
- Weight: 9.20 kg
- Swivels: 2 x 360°
- Standards: EN 360:2023 and EN 1496:2017 Class B
- ATEX marking: II 2 G Ex h IIC T6 Gb
- Approved for sharp-edge use: no
- Suitable for fall factor 2: no
Package contents
- KALYPSO retractable fall arrester with integrated rescue winch
- FA 50 101 17 upper connector
- Stainless steel lower connector with fall indicator
- FA 20 904 20 guide cord for controlled wire-rope retraction
Recommended Products


