Jalas 1898W Winter King Winter Safety Boots

JALAS 1898W Winter King winter safety boot

Availability: 2–4 business days

JALAS 1898W Winter King is a high-cut, triple-lined S3 winter safety boot designed for very cold and demanding working environments. Certified for welding, the boot features an aluminium toe cap, plasma-treated textile penetration protection and a heat- and oil-resistant nitrile rubber outsole.

Key features

• Extremely warm, triple-lined winter model
• Aluminium toe cap
• Plasma-treated composite textile penetration protection (PTC)
• Heat- and oil-resistant nitrile rubber outsole
• Water-repellent PU-coated leather upper
• Heat-resistant upper with KEVLAR® thread in the seams
• ProNose toe reinforcement
• Wide fit and padded boot shaft
• JALAS 8245 FX2 ThermAL insole
• Double PORON® XRD® shock-absorption zones
• Antistatic properties and ESD construction conforming to IEC 61340-5-1
• Sizes 35–50

Applications

The boot is suitable for outdoor work, cold and demanding environments, warm surfaces and workplaces with a risk of sharp objects penetrating the outsole. The manufacturer's stated primary applications include welding, hot work, metalwork and sheet-metal work.

Who is it for?

JALAS 1898W is intended for welders, metal industry professionals and others working in cold conditions who require a high-cut, wide-fitting safety boot certified for heat-related working environments.

Standards explained

• EN ISO 20345:2011 S3: safety footwear with a protective toe cap, closed heel area, antistatic properties, heel energy absorption, a water-repellent upper and penetration protection.
• EN ISO 20349-2:2017 WG: footwear certified against risks encountered in welding and related processes.
• SRC: slip resistance tested on both ceramic tile and steel surfaces under the applicable standard.
• CI: sole construction tested for insulation against cold.
• HI: sole construction tested for insulation against heat.
• HRO: outsole tested against contact heat of 300°C for 60 seconds.
• ESD: conforms to IEC 61340-5-1 requirements for controlled dissipation of electrostatic charges.

Protective properties

The boot helps protect against toe injuries, penetration by sharp objects, cold and electrostatic charges in the working environment. According to the manufacturer, the specially treated upper construction has a maximum operating heat limit of 400°C for 30 minutes. The KEVLAR® seam thread withstands short-term exposure to 427°C and longer-term exposure to 204°C. The construction also resists welding sparks and grinding splash.

Limitations

• The footwear is water repellent but is not stated to be WR-rated or fully waterproof. Suitability for continuous wet use must be assessed separately.
• Chemical resistance has not been established under EN 13832.
• The footwear is not stated to be certified for chainsaw use under EN ISO 17249.
• ESD and antistatic properties do not make the boot electrically insulating against electric shock.
• The manufacturer's temperature values refer to defined exposure conditions and do not indicate suitability for continuous work at the same ambient temperature.
• Suitability for other special electrical, chemical or thermal protection requirements must be confirmed before use.

Technical summary

SEO title

JALAS 1898W Winter King S3 winter safety boot

Meta description

JALAS 1898W Winter King is an extremely warm S3 winter safety boot for welding and demanding cold working environments. Sizes 35–50.