JALAS 1378B winter safety footwear






- Product Code: 1378B
JALAS Heavy Duty 1378B - warm S3 safety boot for demanding winter work
JALAS Heavy Duty 1378B is a fully lined winter safety boot for cold, slippery and demanding outdoor working environments. The upper is made from water-repellent PU-coated leather, while the polyester fur and Thinsulate™ lining helps protect the feet from cold conditions.
The Vibram Arctic Grip traction outsole is designed to improve grip on slippery winter surfaces. The boot has a composite toe cap, steel penetration-resistant insert and a wear-resistant PU ProNose toe reinforcement. The JALAS 8245 FX2 ThermAL insole combines merino wool, aluminium foil and double PORON® XRD® shock-absorption zones for added thermal comfort and cushioning.
1378B replaces model 1378
Production of the JALAS 1378 has been discontinued and the replacement product is the 1378B. Based on the product information published by the manufacturer, the main confirmed change is updated certification from EN ISO 20345:2011 to EN ISO 20345:2022. The previous model was marked S3 SRC CI HRO, while the 1378B is marked S3 HRO CI FO. The SRC marking is not used in the same way under the 2022 standard, so its absence from the new marking does not by itself indicate a reduction in outsole performance or grip. FO confirms resistance of the outsole to fuel oil. The manufacturer has not announced any other significant structural changes to the 1378B.
Key features
- EN ISO 20345:2022 S3 HRO CI FO
- Composite toe cap
- Steel penetration-resistant insert
- Water-repellent PU-coated leather upper
- Polyester fur and Thinsulate™ winter lining
- Vibram Arctic Grip traction outsole made from HNBR rubber with gripper lugs
- Heat- and fuel-oil-resistant outsole
- JALAS 8245 FX2 ThermAL winter insole
- Double PORON® XRD® shock-absorption zones
- Antistatic properties and ESD performance conforming to IEC 61340-5-1
- Bellows tongue, snow lock, ankle support and padded shaft
- Reflective detail and pull loops
- Lace and side-zip fastening
- Supplied with blue and black shoelaces
Applications
The safety boot is suitable for outdoor work, cold conditions, slippery winter surfaces and demanding working environments. Typical applications include construction, maintenance, property services, transport, warehousing and other work requiring a warm S3 safety boot.
Who is it suitable for?
The 1378B is suitable for users who need a regular-fitting, high-cut safety boot for cold outdoor work. The laces allow the fit to be adjusted, while the side zip makes the boot easier to put on and remove.
Standards explained
- EN ISO 20345:2022: the standard for safety footwear intended for occupational use.
- S3: includes a safety toe cap, penetration resistance, antistatic properties, energy absorption in the heel area and upper materials that limit water penetration and absorption.
- HRO: the outsole has been tested for resistance to contact heat.
- CI: the sole construction provides cold insulation as specified by the standard.
- FO: the outsole is resistant to fuel oil as specified by the standard.
- ESD: according to the manufacturer, the footwear conforms to IEC 61340-5-1 requirements for electrostatic discharge control.
Protective properties
The composite toe cap protects the toes, while the steel penetration-resistant insert reduces the risk of sharp objects penetrating through the sole. The PU ProNose reinforcement protects the upper against wear during kneeling work. Double PORON® XRD® zones in the insole provide shock absorption under the heel and forefoot.
Limitations of use
The footwear is water repellent, but it is not specified as waterproof. No chemical resistance according to EN 13832 or chainsaw protection according to EN ISO 17249 has been declared. HRO refers to the contact-heat resistance of the outsole and does not by itself make the product suitable for welding or continuous use in extremely hot environments. ESD footwear is not electrically insulating footwear. Suitability for chemicals, welding, forestry work, continuous wet use and special electrical hazards must be verified separately.
Technical summary
| Product type | Winter safety boot |
|---|---|
| Model | JALAS Heavy Duty 1378B |
| Protection class | S3 HRO CI FO |
| Standard | EN ISO 20345:2022 |
| PPE category | Cat. II |
| Toe cap | Composite |
| Penetration protection | Steel |
| Upper material | Water-repellent PU-coated leather |
| Toe reinforcement | PU ProNose |
| Lining | Polyester fur and Thinsulate™ |
| Insole | JALAS 8245 FX2 ThermAL |
| Insole materials | Textile, aluminium foil, soft EVA, merino wool, polyester-based ESD thread and double PORON® XRD® shock-absorption zones |
| Midsole | PU |
| Outsole | Vibram Arctic Grip, HNBR rubber with gripper lugs |
| Fastening | Laces and zipper |
| Fit | Regular |
| ESD | Yes, IEC 61340-5-1 |
| Colour | Black with blue details |
| Sizes | 35–48 |
| Net weight | 1.74 kg, size 42 |
| Replaces | Discontinued JALAS Heavy Duty 1378 |
| Manufacturer information | JALAS Heavy Duty 1378B - manufacturer product page |
