Cofra Light Black S5S Safety Boot
- Product Code: 00090-N01
- Product features: High-traction rubber outsole
Cofra Light Black S5S Safety Wellington Boot
Lightweight construction | TPU outsole | Wide 11 Mondopoint fit
Cofra Light Black S5S is a metal-free polyurethane safety boot for cold, wet and dirty working environments. It features a 200-joule fibreglass toe cap, a metal-free APT PLUS penetration-resistant insert and a shock-absorbing Foot-Pad footbed.
The EN ISO 20345:2022+A1:2024 S5S AN CI LG FO SR classification covers features including penetration resistance, ankle protection, cold insulation, ladder grip, fuel-oil resistance and tested slip resistance. According to the manufacturer, the Cold Defender PU upper and TPU outsole withstand temperatures down to -25 °C.
Key Features
- Completely metal-free safety boot
- Non-metallic fibreglass toe cap tested to 200 J
- Metal-free APT PLUS penetration-resistant insert
- Antibacterial Cold Defender PU upper
- Cold-resistant TPU outsole
- Soft, self-moulding Foot-Pad footbed
- Thermo-welded polyester lining
- Wide 11 Mondopoint fit
- Kick-off lug for easier removal
- EU sizes 36–48
Applications
This safety boot is suitable for cold, wet and dirty workplaces where toe protection, penetration resistance and a high boot shaft are required. Potential applications include agriculture, maintenance, waste management, municipal services, water utilities, wet industrial areas and outdoor warehouse or logistics work.
The LG sole design supports work on ladders, while the AN marking provides tested protection around the ankle. Final suitability must be determined according to the workplace hazards, walking surfaces and substances being handled.
Who Is It For?
Cofra Light Black S5S is suitable for users who need a wide-fitting, metal-free and easy-to-clean safety boot. It is intended particularly for work where a low safety shoe would not provide sufficient protection against moisture, dirt or hazards underfoot.
Standards Explained
- EN ISO 20345:2022+A1:2024: the standard specifying requirements for occupational safety footwear.
- S5S: a protection class for polymer safety boots that includes a safety toe cap, antistatic properties, heel energy absorption, a watertight construction, a cleated outsole and PS-level penetration resistance.
- AN: tested ankle protection against impact.
- CI: the sole construction provides cold insulation in accordance with the standard’s test requirements.
- LG: the outsole design provides support and grip when standing on ladder rungs.
- FO: the outsole resists fuel oil in accordance with the standard.
- SR: the footwear has passed the standard’s additional slip-resistance test.
Protective Features
The non-metallic fibreglass toe cap protects the toes against falling objects and compression. The textile APT PLUS insert reduces the risk of sharp objects penetrating through the sole while keeping the boot metal-free. The AN construction provides tested impact protection around the ankle.
The Foot-Pad footbed is made from very-low-density polyurethane. According to the manufacturer, it moulds to the foot, helps distribute body weight and absorbs impacts, particularly around the heel. A New Poland thermo-insulating liner is available separately.
Limitations
The stated resistance of the Cold Defender PU material and TPU outsole down to -25 °C describes a material property. It does not by itself guarantee thermal comfort for the wearer in all conditions at -25 °C. The required thermal protection depends on exposure time, activity level, socks and the use of an additional liner.
Do not use this product as electrically insulating footwear. Antistatic properties do not provide protection against electric shock, and no ESD approval is stated for this product. Suitability for welding, chainsaw work, extremely hot conditions or tasks requiring cut-resistant footwear must be verified separately.
The manufacturer’s product page provides a substance-specific chemical-resistance document. Always verify compatibility with the particular chemical, concentration, temperature and exposure time before use. The boot should not be regarded as general-purpose chemical-protective footwear without substance-specific confirmation.
Technical Summary
| Product type | Metal-free polyurethane safety wellington boot |
|---|---|
| Safety classification | S5S AN CI LG FO SR |
| Standard | EN ISO 20345:2022+A1:2024 |
| Toe cap | Non-metallic fibreglass toe cap, 200 J |
| Penetration resistance | Metal-free APT PLUS - Zero Perforation insert |
| Upper material | Antibacterial Cold Defender PU, stated by the manufacturer to resist temperatures down to -25 °C |
| Outsole | TPU, stated by the manufacturer to resist temperatures down to -25 °C |
| Internal lining | Thermo-welded polyester |
| Footbed | Foot-Pad, low-density shock-absorbing PU footbed |
| Width | 11 Mondopoint |
| Ankle protection | AN |
| Cold insulation | CI |
| Ladder grip | LG |
| Fuel-oil resistance | FO, outsole |
| Slip resistance | SR |
| Antistatic properties | Yes, as required by the S5S classification |
| ESD | Information must be verified with the manufacturer |
| Metal-free | Yes |
| Colour | Black |
| Sizes | EU 36–48 / UK 3–13 |
| Optional accessory | New Poland thermo-insulating liner |
| Manufacturer information | Cofra Light Black S5S product page |
Fitting, Business Orders and Returns
Ask the seller about fitting, size selection, business orders, larger quantities, quotations and alternative models. The wide 11 Mondopoint fit should be tested with the socks and optional thermal liner intended for use at work.
The return conditions for products held in store are determined by the seller’s terms. The right to return a special-order product may depend on the manufacturer, brand and individual product number. Confirm the exchange and return conditions for special-order products before placing an order.
Frequently Asked Questions
Is the boot suitable for cold conditions?
Yes. The product carries the CI marking. According to the manufacturer, the Cold Defender PU upper and TPU outsole withstand temperatures down to -25 °C. The wearer’s thermal comfort also depends on exposure time, activity level and other clothing.
Is the boot completely metal-free?
Yes. The manufacturer specifies a non-metallic fibreglass toe cap and a metal-free APT PLUS penetration-resistant insert.
Can the boot be used with chemicals?
Compatibility must be checked for the particular substance being handled. A chemical-resistance document can be downloaded from the manufacturer’s product page.
Can the footbed be replaced?
The boot includes a Foot-Pad footbed. Compatibility with replacement or orthopaedic footbeds should be confirmed with the seller or manufacturer.
Where can certificates and further technical information be found?
The manufacturer’s product page provides product information and links to the certificate, declaration of conformity and chemical-resistance document: Cofra Light Black S5S.
SEO Title
Cofra Light Black S5S Metal-Free PU Safety Boot
Meta Description
Metal-free Cofra Light Black S5S safety boot for cold and wet work. Fibreglass toe cap, APT PLUS penetration protection and a wide fit.
