BoSafety Multinorm Summer Jacket CL2





- Product Code: AS-MULTISAFE-JK-C2
BoSafety MULTISAFE Multinorm Summer Jacket, High-Visibility Class 2
The BoSafety MULTISAFE is a flame-protective and antistatic high-visibility jacket designed for electrical installations, industrial work and environments requiring multinorm protective clothing. Its cotton-rich fabric is comfortable and breathable, making it particularly suitable for summer use and warm working conditions.
The jacket provides protection against heat, flame, the thermal effects of an electric arc, static electricity and limited liquid chemical splashes. It is also suitable for occasional light hot work. However, the fabric is not recommended for continuous exposure to heavy sparks, such as prolonged angle grinding or heavy-duty welding.
Key Features
- High-visibility class 2, EN ISO 20471
- Flame-protective and antistatic fabric
- Breathable fabric containing 75% cotton
- Arc flash protection ATPV 13.66 cal/cm² and ELIM 10 cal/cm²
- Limited protection against liquid chemical splashes
- Two chest pockets, one with an ID card pocket
- Two waist pockets with flaps
- Two-way zip with protective flap
- Elasticated cuffs and extended back
- Adjustable hem and reflective strips
- Regular fit
Arc Flash Protection – ATPV and ELIM
The garment's arc flash calorie ratings indicate tested protection levels against thermal energy generated by an electric arc.
- ATPV 13.66 cal/cm²: the incident energy level associated with a 50% predicted probability of second-degree burns under the test method.
- ELIM 10 cal/cm²: a test-based incident energy limit determined without accepting predicted second-degree burns or material breakopen.
These numerical ratings are particularly useful for electrical work in data centres and industrial facilities where an arc flash class rating alone may not meet site requirements. The required protection level must always be determined through a workplace risk assessment.
Recommended Applications
- Electrical installations and electrical industry
- Data centre installation and maintenance
- Industrial service and maintenance
- Occasional light hot work
- Work areas requiring multinorm protective clothing
- Environments requiring limited chemical splash protection
Use limitation: The 300 g/m² cotton-rich fabric is not the preferred choice for continuous heavy spark exposure, heavy-duty welding or prolonged angle grinding. More durable protective clothing designed for intensive hot work is recommended for these applications.
Technical Specifications
- Product code: AS-MULTISAFE-JK-C2
- Material: 75% cotton, 24% polyester and 1% antistatic fibre
- Fabric weight: 300 g/m²
- Colour: high-visibility yellow/navy
- Sizes: 46–64
- Fit: regular
- High-visibility class: 2
- ATPV: 13.66 cal/cm²
- ELIM: 10 cal/cm²
Standards
- EN ISO 13688: general requirements for protective clothing
- EN ISO 20471, class 2: high-visibility clothing
- EN 1149-5: protective clothing with electrostatic properties
- EN 13034, type 6: limited chemical splash protection
- EN ISO 11611, class 1 A1+A2: protective clothing for welding
- EN ISO 11612 A1+A2 B1 C1 E1 F1: protection against heat and flame
- IEC 61482-2, APC 1: protection against the thermal effects of an electric arc
Note: The jacket is intended to be worn with compatible MULTISAFE trousers. Always ensure that the complete protective clothing system meets the requirements of the task-specific risk assessment.
