Retractable Webbing Fall Arrester 2m RolexII Probelt

Retractable webbing fall arrester WR040S is a PPE fall protection device for vertical use in MEWPs and lifting baskets, including foot-level anchorage (fall factor 2). It is intended for construction and industrial environments where the anchor point may be positioned above or below the user.

Retractable Webbing Fall Arrester 2m Rolex II Probelt WR040S Vertical Use

General information

Retractable webbing fall arrester for fall arrest systems in mobile elevating work platforms and lifting baskets. The primary functional benefit is approval for foot-level anchorage (FF2), enabling compliant use when the anchor point is located at floor level.

From a procurement and HSE perspective, it is essential to verify anchor strength requirements and confirm that the application does not involve sharp edge exposure.

Technical specifications

• PRODUCT TYPE: retractable type fall arrester (webbing)
• LENGTH: 2 m
• CONSTRUCTION: retracting mechanism with internal brake in plastic housing; top swivel
• MAIN MATERIAL: 18 mm working webbing; integrated energy absorber
• CONNECTORS: AZ029SS carabiner, 50 mm gate opening; swivel connection reduces twisting
• MAX USER WEIGHT: 140 kg
• USE: vertical use; approved for foot-level anchorage (FF2); not rated for sharp edge use
• CERTIFICATION: EN 360:2002 (Retractable type fall arresters); CNB/11.085 (FF2 recommendation test)
• INSPECTION: pre-use visual inspection; periodic inspection every 12 months by a competent person

Benefits and differences compared to similar products

• Approved for fall factor 2 foot-level anchorage in vertical configuration, which is not standard for all retractable devices.
• 50 mm connector facilitates attachment to MEWP and basket anchor points compared to smaller gate openings.
• Webbing-based design differs from cable units and requires controlled use in environments without sharp edges.
• Allows both overhead and below-user anchorage, supporting varied MEWP work methods.

Intended use

Suitable for use in MEWPs and lifting baskets where retractable fall protection is required and anchorage may be above or at foot level. Common applications include construction, industrial maintenance and installation tasks as part of a PPE fall arrest system.

Not suitable for sharp edge environments, horizontal leading edge applications, or extended horizontal travel systems.

Support note: When anchoring at foot level inside a MEWP, FF2 approval is typically a minimum requirement, but required clearance below the user must still be verified according to the system configuration.

Q & A

• WARRANTY: according to manufacturer and distributor terms.
• AVAILABILITY: in stock at Kerava and Turku stores.
• TECHNICAL QUESTIONS: provide details of the MEWP type, anchor location and potential edge exposure to confirm compatibility within the complete PPE fall protection system.

Delivery information

• DELIVERY METHODS: store collection or shipment.
• DELIVERY TIME: immediate dispatch subject to stock confirmation.
• STORE AVAILABILITY: Kerava and Turku.