Probelt at192 Anchor Point for Steep Roof Fastening Point 1m
- Product Code: AT192
Durable and Safe Anchor Point for Steep Roofs
The Probelt AT192 Anchor Point is a high-quality anchorage device designed for safe and reliable connection of personal fall protection equipment. Built to meet EN 795:2012 Type A standards, it ensures maximum safety for professionals working on steep or sloped roofs.
Strong Construction and Certified Design
The AT192 anchor point is made of stainless steel (ANSI316) and galvanized steel, ensuring high corrosion resistance and long service life even in demanding environments. The 5 mm cable and 12 kN static strength guarantee durability and performance under heavy use.
Technical Specifications
- Length: 1 m
- Cable diameter: 5 mm
- Material: stainless steel and galvanized steel
- Static strength: 12 kN
- Mounting hole diameter: 13 mm
- Maximum number of users: 1
- Standards: EN 795:2012 Type A, EN 365:2004
Easy Installation and Compatibility
The anchor point is designed for simple installation on structural anchor points using M12 bolts. Suitable for both wood and steel structures (minimum 80x80 mm beam size). The correct tightening torque is 8 Nm. The device can also be installed on concrete surfaces using mechanical anchors with M12 threaded shanks.
Applications and Key Benefits
- Specifically designed for steep roof installations
- High mechanical strength and long service life
- Reliable anchorage for a single user
- Easy to inspect and maintain
- Complies with European safety standards
Usage and Maintenance
The anchor point must be used only by a trained and competent person. Before each use, check the condition of the device and ensure compatibility with other fall protection components. The device can be used for up to 5 years before mandatory inspection by the manufacturer or an authorized person. If the anchor has been used to arrest a fall, it must be withdrawn from service immediately.
Advantages over Competing Products
- Fully certified to EN 795 Type A for permanent anchorage
- Manufactured from premium stainless steel ANSI316 for superior corrosion resistance
- Engineered specifically for steep roofs where safe anchoring is critical
- Tested and approved by APAVE SudEurope SAS, France
Frequently Asked Questions (FAQ)
Can the Probelt AT192 anchor point be used on any roof?
It is designed primarily for steep roofs and can be installed on both wood and steel structures, provided the structure meets the required load-bearing capacity.
How many users can attach to the anchor at once?
The AT192 anchor point is designed for single-user operation only to ensure full safety.
How often should the anchor point be inspected?
A visual inspection must be carried out before each use. In addition, a periodic inspection every 12 months must be performed by a competent or authorized person.
Can the device be reused after stopping a fall?
No. If the anchor point has been used to arrest a fall, it must be permanently removed from service and replaced with a new one.
What makes Probelt AT192 different from other roof anchors?
Unlike lighter or temporary anchors, the AT192 is a permanent Type A anchor device offering superior strength, corrosion resistance, and certification for professional use.
Summary
The Probelt AT192 Anchor Point is an ideal solution for professionals seeking a durable, certified, and safe anchorage system for steep roofs. Its robust construction, ease of installation, and full compliance with EN standards make it a trusted choice for demanding working conditions.
