Fristads 8084 FLAM class 3 coverall high-visibility
- Product Code: 8084
Fristads 8084 FLAM is a flame-protective high-visibility coverall designed for welding and industrial work environments where visibility, heat and flame protection, and electrostatic control are required. The garment is intended for maintenance, energy and process industry applications where multi-standard protective clothing and industrial laundering durability are necessary.
General information
This coverall combines high-visibility functionality with flame protection and welding suitability in a single garment. The primary functional benefit is the continuous protective structure, which reduces exposure risks associated with the interface between separate jacket and trouser garments.
For procurement and safety management, the product is suitable for environments where clothing must simultaneously comply with multiple protective standards and tolerate repeated industrial laundering.
Technical specifications
- PRODUCT TYPE: flame-protective high-visibility coverall
- MAIN MATERIAL: 75% cotton, 24% polyester, 1% antistatic fibre
- CONSTRUCTION: two-way front zipper with protective placket, concealed snap fastening, reinforced crotch seam, CORDURA® reinforced knee pockets and leg ends
- PROTECTION CLASS / CERTIFICATIONS: EN ISO 11612 (Heat and Flame Protective Clothing), EN ISO 11611 Class 1 (Protective Clothing for Welding), EN 1149-5 (Electrostatic Properties), EN 61482-1-2 APC 1 (Arc Flash Protection), EN 61482-1-1 ELIM 8 cal/cm² (Arc Flash Protection), EN ISO 20471 Class 3 (High Visibility Clothing), EN 14404 (Knee Protection) when used with knee pads 124292
- REFLECTIVE ELEMENTS: certified high-visibility reflective tape compliant with EN ISO 20471 (High Visibility Clothing)
- POCKETS AND ATTACHMENTS: chest pockets, internal pocket, phone pockets, front pockets, back pockets, ruler pocket, thigh pocket, ID card pocket, D-ring and hammer loop
- ADJUSTMENTS: elasticated waist with button adjustment, adjustable cuffs, adjustable knee pad height
- KNEE PROTECTION: internal knee pad pockets certified to EN 14404 (Knee Protection) with knee pads 124292
- COLOR: high-visibility yellow / navy
- FABRIC WEIGHT: 365 g/m²
- SIZE RANGE: S–3XL
- MANUFACTURING / CARE: approvals maintained after 50 washes, tested according to ISO 15797 (Industrial Washing), transitioning to PFAS-free treatment
Benefits and differences compared with similar products
- The coverall construction provides continuous protection in work situations where garment separation points may increase exposure risk.
- Combines high-visibility clothing, welding protection and arc flash protection in one garment, reducing the need to change clothing between tasks.
- CORDURA® reinforcements in knees, leg ends and pocket areas support use in high-abrasion tasks.
- ISO 15797 (Industrial Washing) testing and durability after 50 washes support use in environments where garments are maintained through industrial laundering services.
Intended use
The garment is suitable for users working in welding, maintenance, energy production, process industry and other high-visibility environments requiring multi-standard protective clothing. It is particularly intended for workplaces where workers may be exposed to heat, sparks, arc flash hazards or industrial contamination and where garments are subject to professional laundering.
The product is not intended for welding environments requiring protection levels higher than EN ISO 11611 Class 1 (Protective Clothing for Welding), or for applications where lightweight visibility clothing without multi-risk protection is sufficient. This distinction helps clarify its intended use in controlled industrial environments rather than low-risk work settings.
Q & A
Is the product covered by a warranty?
Warranty conditions are not specified in the available product information. Warranty and claim inquiries should be submitted in writing to the seller or the manufacturer’s customer support.
Is the product available?
The product is listed as available. Size-specific availability may vary depending on stock levels.
How should technical questions be submitted?
Technical inquiries should be sent in written form and include the work environment, required standards, size requirements and possible laundering conditions. This enables a more accurate evaluation of product suitability.
Delivery information
Delivery methods, delivery time and possible store availability are stated separately on the product page.
